The Watch Site banner

Zodiac Help !!!!

1129 Views 9 Replies 5 Participants Last post by  DAHASCO
I need a hand as to what the problem could be with this>

A new battery was installed and nothing...All mechanical functions work as they should, I put the watch on a demagnetizer and the hands spin...Do the coils go out on these ? I know new movements are cheap, But that's not the point ;)
1 - 1 of 10 Posts
I may be wrong, but if the hands spin with a de-magnetiser -wouldn't that indicate a good coil????. I think it would take a massive field strength to move the rotor.
You could try removing the coil and then re-test it.
What does it say on the movement? - the pic is a bit blurry.
It looks like a Ronda - here's a page from the datasheet.


1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.