The Watch Site banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1,711 Posts
Discussion Starter #1
Hi All.

Just wondering if anyone can shed any light on this.

I am after a new crystal for my 600 quartz tuna. The correct p/n is 335W10GAO.

Does anyone know if a 335W08GA00 is the same ?

I know the first 2 or 3 characters are diameter - but don't know what the '08' and '10' signify.

Any help would be appreciated.

Thanks

Barry
 

·
Registered
Joined
·
1,711 Posts
Discussion Starter #3
Thanks John.

I have the Gasket one but not seen the glass code - its appreciated.

I note the the 2 digits in question, refer to the serial number. So presumably this is an arbitrary number - and as the rest of the numbers are the same - then presumably the glass is the same. I think ?
 

·
Administrator
Joined
·
30,146 Posts
Thanks John.

I have the Gasket one but not seen the glass code - its appreciated.

I note the the 2 digits in question, refer to the serial number. So presumably this is an arbitrary number - and as the rest of the numbers are the same - then presumably the glass is the same. I think ?
Knowing Seiko I very much doubt it Barry :)
 

·
Registered
Joined
·
2,999 Posts
Barry, all the monocoque quartz tunas share interchangeable crystals, aside materials of course (i.e., the SBBN011/013 are sapphire).

You can buy the 7c46-7008/9 (SSBS018) 1000m golden tuna crystal, which is a direct substitute for the old 600m quartz crystal.
 
1 - 7 of 7 Posts
Top