[bradurani]

Hi all, I have a 7002-7039, and I'm exploring some strap and bracelet options with curved ends. All the ones I'm interested in - including the OEM jubilee bracelet , US curved-end waffle strap and StrapCode curved-end silicone - have separate versions for the SKX 007 / 009 vs the SKX 013 / 015. Does anyone know if either of these profiles matches the 7002-7039? Thank you!

 

[vincentg]

I can tell you that the SKX 013 has a 20mm lug width and will not fit. The 007/009 are 22mm lug width but their case diameter is a bit larger and I don't think anything for an SKX will make a perfect fit. This solar pepsi diver of mine came on a SKX strapcode bracelet and it took quite a bit of time and material removal to get the end links to fit nicely.

 

[twall3]

When I still owned a 7002 I wore it on a stock SKX jubilee (22mm from an 007) and didn't notice any fit issues - looked great to me.

 

[NWDiverWatch62]

SKX007 on the left, 7002-7039 on the right. Case measurements are the same. 22mm lug width.

 

[vincentg]

lug width is 22mm for both but internet search shows 1.5mm difference in diameter, I only own a SKX 009 and have no 7002 to compare it to. For OEM hollow trim pieces it probs doesn't matter, but for milled SEL I think it will matter.

 

[Grammarofdesign]

I would think for originality you could find a Y035 bracelet. It was the OEM for the 7002-700X 150m lineup.

All the 150m cased 7002 divers are a perfect fit to the SKX end links, hollow or SEL. I don't know about the 7002-7039 200m.

 

[NWDiverWatch62]

lug width is 22mm for both but internet search shows 1.5mm difference in diameter, I only own a SKX 009 and have no 7002 to compare it to. For OEM hollow trim pieces it probs doesn't matter, but for milled SEL I think it will matter.

So I got out the calipers and the watches and did some measuring. Lug width 22mm, lug height 7mm. Spring bar holes same diameter, but not consistent in height from bottom of lug. The SKX009 & the black bezel 7002-7039 were both about 1.1mm from bottom, the Pepsi bezel 7002-7039 & the SKX007 were both at about 1.35mm from bottom.
This is what the .25mm difference looks like:

Here's what the difference looks like on the cases:

My conclusion is that the SKX00X & the 7002-7039 cases are identical and that other than how the bezel is attached/restricted is the same for the rest of the 7002's as well...In my experience you can swap bracelets/bands between them without any issues.

 

[tro_jan]

I also own a 7002-7039 Pepsi. And all bracelets and straps are interchangeable with all my SKX (007, 009, 401, 399, A35, etc.) and 7548.
They both have the same case profiles.

Sent from my SM-N980F using Tapatalk

 

[bradurani]

Wow, thank you everyone! Larry AKA Uncle Seiko wrote back to me and said that the curved-end waffle for the SKX007 will fit, so that gels. Thanks again!

 

[Seikonut1967]

I too had a jubilee (skx007) fitted to a 7002 with no issues.

 

[vincentg]

My comment on the difference between SKX and the 7002 was based on published specs of the diameter w/o crown, 7002 is published as 41mm and SKX is published at 42.5mm, my SKX measures 42.4mm, I do not have a 7002 to measure outer diameter w/o crown and the post above does not include that measurement. The difference if present will affect the curvature between the lugs and that will unlikely affect a hollow end link on a bracelet, but may very well affect a milled SEL.

 

[Camu]

Stainless Steel bracelets that fit on a SEIKO 6309 [slim turtle], Seiko 7548 quartz, and SKX [007/009] .... will fit the SEIKO 7002 ........ if u are considering a bracelet of good quality and respects specifications of an OEM Seiko bracelet but is on steroids ... u should check out UNCLE SEIKO and what he has to offer ...... I just bought his REDO of the seiko Z199 bracelet [ only all SOLID LINKS Jubilee bracelet made by Seiko ]

photo of my SKX 009J and SEIKO 7002 ... i can swap bracelets from one to the other watch with no issues

here is the LINK to his webpage : ...... Divers

 

[NWDiverWatch62]

My comment on the difference between SKX and the 7002 was based on published specs of the diameter w/o crown, 7002 is published as 41mm and SKX is published at 42.5mm, my SKX measures 42.4mm, I do not have a 7002 to measure outer diameter w/o crown and the post above does not include that measurement. The difference if present will affect the curvature between the lugs and that will unlikely affect a hollow end link on a bracelet, but may very well affect a milled SEL.

Sorry I misunderstood. So I grabbed a 7002-7001, a 7002-7039, and an SKX007. The 7002's both measured 42.4 and the SKX007 measured 42.5. At 0.1mm, it was probably lack of skill/consistency in my measuring rather than an actual noticeable difference in the cases. Sorry for the confusion. Hope this is helpful.

 

[Saul]

7548-700x/6309-729x/7002-70xx/7s26-002x - all 22mm, all with the same lug profile.

 

[vincentg]

Sorry I misunderstood. So I grabbed a 7002-7001, a 7002-7039, and an SKX007. The 7002's both measured 42.4 and the SKX007 measured 42.5. At 0.1mm, it was probably lack of skill/consistency in my measuring rather than an actual noticeable difference in the cases. Sorry for the confusion. Hope this is helpful.

.1mm is not any difference, if you google it reads that 7002 is a 41mm case, SKX 42.5mm, my bad sorry

 

[Camu]

 

[vincentg]

View attachment 496349 View attachment 496350

Lovely pics ty

 

[Camu]

SEIKO 7002-7009 A1
with GL-831 rubber diver strap