The Watch Site banner

1 - 6 of 6 Posts

·
Registered
Joined
·
477 Posts
Discussion Starter #1 (Edited)
SPR 315/SKX-779. Same case, different bezel, so I'm answering my own question... Maybe

I am considering ordering the PVD bezel from COSERV rather than pay for one and send it off for PVD'ing avoiding the LONG wait... And most likely higher cost.

Anyone have a good case back photo of the 315 ? Better still; Anyone have the Seiko/COSERV PN ? The SKX-779 bezel PN is: 8601 5739. so maybe the PVD bezel is similar?

as COSERV will want the case number to cross reference the correct PVD bezel part

Thanks for any help

John
 

·
Registered
Joined
·
4,931 Posts
SRP315 case number 4R36-01J0.
SRP581 case number 4R36-01J0.
SRP581 Rotating bezel gasket 0G330BA11.
SKX779 Rotating bezel gasket 0G330BA11.
SRP583 has a black bezel.
 

·
Registered
Joined
·
477 Posts
Discussion Starter #3 (Edited)
COSERV won't sell to private parties...

Thanks for the PN's


Called COSERV in NJ this am they won't sell the bezel to me......:eek:hmy:


only through a dealer, :confused: must be a change in policy, I may pass....:( the dealer might "add" a markup to the price.
 

·
Registered
Joined
·
477 Posts
Discussion Starter #4
Interesting SEIKO part price vendor compairson

Two separate second party SEIKO parts source vendor quotes:

And a;

WOOPING $40 price difference :confused: for the same part. went with the less expensive same PN which was Esslinger @ $48
 

·
Registered
Joined
·
4,931 Posts
That price doesn't seem unreasonable, many parts houses add hefty shipping and handling for small orders - time is money...so to speak.
 
1 - 6 of 6 Posts
Top