The Watch Site banner

Seiko diver bezel puzzler?

1339 Views 12 Replies 6 Participants Last post by  seikochrono
Hi Guys
This is a real puzzler, Came in only a Seiko sealed cellophane/plastic with no part number, lovely bezels but hey Ive done tons of research & also Duncan's been looking & we have had no joy. from the front looks like the same bezel pip as the Arnie but its not as the number one is different & also teeth on the back are different. Anyone able to solve the mystery, Thanks in advance, pics below.

Attachments

See less See more
6
1 - 13 of 13 Posts
It looks like a 6106 rally diver bezel, but with a 6309 diver style insert. I believe the bezels and inserts are interchangeable between these watches, so maybe just a mismatch?
Scratch that, I just found a pic of the underside of a rallye bezel and it's nothing like yours.
It looks like a 6106 rally diver bezel, but with a 6309 diver style insert. I believe the bezels and inserts are interchangeable between these watches, so maybe just a mismatch?
These are original sealed in packets & this is a ratchet style that clicks, I have lots of rally divers & none click. Cheers.
What size is it ? would it fit such as a 6309 ?
Could you give some dimensions please? Inside diameter of bezel would be useful, as well as insert inner /outer.
Could you give some dimensions please? Inside diameter of bezel would be useful, as well as insert inner /outer.
See pics - 1st pic is 39.2

Attachments

See less See more
4
Looks to me like it's from the later 7002 series of divers which had the large pip but used the same click ring as the 7S26 SKX series of divers.
Looks to me like it's from the later 7002 series of divers which had the large pip but used the same click ring as the 7S26 SKX series of divers.
The 7002 divers bezel insert inner diameter is 31.5mm - so I think this one's too small, as well as having the single cut bezel grips.
It's a teaser for sure.
Could it be for Pulsar Diver?

Looks a lot like the one on a Y514-6009 150m diver. Can't find my measuring device to check sizes.
Looks a lot like the one on a Y514-6009 150m diver. Can't find my measuring device to check sizes.
Nice one, Ive just researched google for this model & I think you maybe right, Found some pics of it from a few angles & it looks identical so I would appreciate them sizes when you have time Sir, Thanks, Regards stefan
Measurements

Sorry it took so long had to make a trip to harbor freight. Bad news OD is 39.0mm and it is a bidirectional bezel
Sorry it took so long had to make a trip to harbor freight. Bad news OD is 39.0mm and it is a bidirectional bezel
Thanks for the effort, Much appreciated
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top