The Watch Site banner
1 - 3 of 3 Posts

· Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
Hi all.

I have a nice, original Bullhead that's currently in service for a slipping hour register gear. The watchsmith is having trouble sourcing a replacement part.

Has anyone else been through anything similar?
 

· Registered
Joined
·
52 Posts
Discussion Starter · #3 ·
All the time. It's possibly not broken, just needs cleaning and setting properly. (It can be a real pita).
If the gear is slipping...you mean the hour register is still turning whilst the chrono is not running, then he needs to check the on the amount of force being pressed against the side of the gear...there is an eccentric screw to adjust which might help.

T
Thanks for this. I will be speaking with him tomorrow and pass this info on!

Sent from my SM-G900W8 using Tapatalk
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top