The Watch Site banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,004 Posts
The sapphire I send to Yamaha was intended for the H558-5000 Anrie :)

Got it from Yobokies.

Crystal H601: 310P13HN02
Crystal H558: 310W60GA00

http://members.chello.nl/r.herpt/Pics/Crystal_1.JPG
http://members.chello.nl/r.herpt/Pics/Crystal_2.JPG
http://members.chello.nl/r.herpt/Pics/Crystal_3.JPG
http://members.chello.nl/r.herpt/Pics/Crystal_4.JPG

H558: crystal is placed on the fat gasket and pressed down with a crystal retainer ring.
H601: crystal is pressed in the nylon gasket...

Good to know that the H558 sapphire has survived the pressing in the H601 case.
 

·
Registered
Joined
·
1,004 Posts
mine says hello:


Sapphire fitted.

To do:
put my NOS bezel on it, now I made this picture I see the scratches on the bezel
replace the dial plate, it broke when it was ouside the watch (see below the 6-index). Lucky I did not sell the NOS one I have :)
replace the hands, I have a set of H558 hands, they will do.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top