sjbrook said:Oh I don't know about that....I bought a very nice and all original 6309-7049 a couple of years ago and depending how you go the costs do add up...
Watch $230
Flat Sapphire $ 50
Dial/Hand/Bezel Pip relume $140
Junked 6309-7290 f/Farsi day wheel $ 35
Service $125
Domed Sapphire (because it's cooler) $ 45
Hacking Kit $ 60
Total (not including the myriad of bracelet/strap options bought) ~ $685 - not much less than a Tsunami but worth every penny!
[/quote]
Mind saying who did the re-lume? It looks perfect!
Need some advice...
...on a 6309-704x :
.
I'm seriously thinking about getting a vintage diver, and that cushion case would be outstanding, specially since I don't have anything like that in my box, and the prices that I've seen for this watch are affordable to me. The 6105-8119 looks a lot like the 6309 and is a rarer (and therefor more desirable) piece, but prices are pretty higher, so right now I think the 6309 would be a smart option. What I want to hear is your opinions about the following. Look at this pic (from a sale add at TZ - courtesy of jres11):
![]()
As you can see, the watch is not pristine, with a scratched case, hands are not too good and the bezel has seen better days, but dial and lume look ok. Let's say I can find a watch in this condition, how hard would it be to make it pristine again? Would I be able to find a new bezel and hands? Can I get the case polished close to a factory look again? And of course, how much would I spend for a top notch restoration of a watch like this ?
I ask because I like my watches looking as best as possible. I would not like it to look moded, but look new, so of course I would want to use original parts or at least VERY good aftermarket parts. However, I don't even know if I can make the watch look BNIB with aftermarket parts... Since I don't consider myself a collector and I'm definitively not a purist, I would love to have a good-looking 6309 (pristine if possible) but I wouldn't be bothered if 100% of the parts are not factory parts, as long as they have quality.
And now about bracelet/straps. Lug to lug is 22 mm, right? Was the watch ever offered with anything else then rubber straps? Are the correct straps hard to find? I generally prefer a metal bracelet, but if it's totally wrong on the 6309 I'll settle for rubber.
And now the movement: is the 6309 hard to maintain, in terms of parts? I imagine you set the date by pulling the crown to the first stage out, but what about the day? Advancing the hands over midnight until the day changes and then retroceding the hands back to 11pm and going forward again to change one more day? What languages are on the day wheel?
What say you about all this? :
.I'm seriously thinking about getting a vintage diver, and that cushion case would be outstanding, specially since I don't have anything like that in my box, and the prices that I've seen for this watch are affordable to me. The 6105-8119 looks a lot like the 6309 and is a rarer (and therefor more desirable) piece, but prices are pretty higher, so right now I think the 6309 would be a smart option. What I want to hear is your opinions about the following. Look at this pic (from a sale add at TZ - courtesy of jres11):
As you can see, the watch is not pristine, with a scratched case, hands are not too good and the bezel has seen better days, but dial and lume look ok. Let's say I can find a watch in this condition, how hard would it be to make it pristine again? Would I be able to find a new bezel and hands? Can I get the case polished close to a factory look again? And of course, how much would I spend for a top notch restoration of a watch like this
?I ask because I like my watches looking as best as possible. I would not like it to look moded, but look new, so of course I would want to use original parts or at least VERY good aftermarket parts. However, I don't even know if I can make the watch look BNIB with aftermarket parts... Since I don't consider myself a collector and I'm definitively not a purist, I would love to have a good-looking 6309 (pristine if possible) but I wouldn't be bothered if 100% of the parts are not factory parts, as long as they have quality.
And now about bracelet/straps. Lug to lug is 22 mm, right? Was the watch ever offered with anything else then rubber straps? Are the correct straps hard to find? I generally prefer a metal bracelet, but if it's totally wrong on the 6309 I'll settle for rubber.
And now the movement: is the 6309 hard to maintain, in terms of parts? I imagine you set the date by pulling the crown to the first stage out, but what about the day? Advancing the hands over midnight until the day changes and then retroceding the hands back to 11pm and going forward again to change one more day? What languages are on the day wheel?
What say you about all this? :
1 - 1 of 17 Posts
1 - 1 of 17 Posts
