The Watch Site banner

Need some advice...

2111 Views 16 Replies 9 Participants Last post by  Selym
...on a 6309-704x ::) .

I'm seriously thinking about getting a vintage diver, and that cushion case would be outstanding, specially since I don't have anything like that in my box, and the prices that I've seen for this watch are affordable to me. The 6105-8119 looks a lot like the 6309 and is a rarer (and therefor more desirable) piece, but prices are pretty higher, so right now I think the 6309 would be a smart option. What I want to hear is your opinions about the following. Look at this pic (from a sale add at TZ - courtesy of jres11):


As you can see, the watch is not pristine, with a scratched case, hands are not too good and the bezel has seen better days, but dial and lume look ok. Let's say I can find a watch in this condition, how hard would it be to make it pristine again? Would I be able to find a new bezel and hands? Can I get the case polished close to a factory look again? And of course, how much would I spend for a top notch restoration of a watch like this :eek: ?

I ask because I like my watches looking as best as possible. I would not like it to look moded, but look new, so of course I would want to use original parts or at least VERY good aftermarket parts. However, I don't even know if I can make the watch look BNIB with aftermarket parts... Since I don't consider myself a collector and I'm definitively not a purist, I would love to have a good-looking 6309 (pristine if possible) but I wouldn't be bothered if 100% of the parts are not factory parts, as long as they have quality.

And now about bracelet/straps. Lug to lug is 22 mm, right? Was the watch ever offered with anything else then rubber straps? Are the correct straps hard to find? I generally prefer a metal bracelet, but if it's totally wrong on the 6309 I'll settle for rubber.

And now the movement: is the 6309 hard to maintain, in terms of parts? I imagine you set the date by pulling the crown to the first stage out, but what about the day? Advancing the hands over midnight until the day changes and then retroceding the hands back to 11pm and going forward again to change one more day? What languages are on the day wheel?

What say you about all this? ::)
See less See more
1 - 2 of 17 Posts
Dave covered just about everything. I asked about mesh on 6309s last week. Here's a pic:



The day/date is a quick change - pull crown to first stop, rotate one direction for the date, opposite direction for the day.
See less See more
sharkfinDave said:
Wow, Jeff, those mesh do look 8)
I've gotta try one out, where to buy those ones? They look slightly different from ones I've seen before and even the one I have for my monster, too bad its 20mm and won't fit on my 6309's.


thanks, Dave.
Here, Dave - this guy's on the Trading Post:

http://www.thewatchsite.com/index.php/topic,1563.msg7163.html#msg7163
1 - 2 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top