The Watch Site banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
6,193 Posts
Discussion Starter #1
This question has been coming up a lot lately so here is a little How-To on the different ways of posting pictures to this site.

The new software for our site is powerful. It allows for the posting of images and files (such as office docs and pdf's) in several different ways, depending on whether the file is located in your computer hard drive, or hosted online.

IF A FILE IS HOSTED IN YOUR COMPUTER'S HARD DRIVE:

If a file is hosted in your computer's hard drive, you have to upload the image directly to the forum server as an attachment to your post. To do this, open a post window either by clicking reply or the new topic buttons. Below the post box where you type in your message you will see a toggle link that says "Additional Options". Click on that link and toggle it open. You will no see a series of options you can check or uncheck to enable or disable. below that you will see an attachment upload window with a browse button on it. Click on browse, and find your file in your computer. when you finish with your post, just click post and the system will upload the file that was indicated in the attachment line. If you have more than one file you wish to attach, below the attachement window you will see a link that says "more attachments". click on that and another attachment window will appear. You can upload multiple attachments to a post, but It is recommended that you don't upload more than five files simultaneously. You can always edit your post and upload more files.


IF AN IMAGE IS HOSTED ON-LINE:

If an image is hosted online, you can deeplink it to the site in a number of different ways. Keep in mind that this only deeplinks the image from some other source, and the image is not hosted on SCWF's servers:

1. Using the Insert Image Icon: In every post you will see an icon in your toolbar that looks like this:
. This is your insert Image icon. If you click on it, a little window will pop up (you must allow pop-ups for SCWF). In it you simply copy and paste the IP address of the image you whish to deeplink. Click OK and the system will take care of inserting the appropriate tags to make the image visible. the image will be inserted in the place you had your cursor.

2. Using Image Hosting Services:
If you store your images in a web based Image hosting service, such as Photobucket or Picasa, use the line of code provided by your service that uses square IMG brackets: [ IMG ]. The format will be the IP address of the image in between two of those square IMG brackets. Post that where you want it to appear in your post.

3. Inserting an image manually from some other online source:
To do this you have two options:

  • right click on the image and either copy the image location (if your browser gives you that option), go into the image properties, or click on view image. All three options will give you the same information. What you are trying to do is get the image's IP address so you can then use it to deeplink the image. If you copy an image's location, that will give you that image's direct IP address. If you click on view image, your browser will go to a blank page showing only that image in full size. the image's IP address will be in the address bar at the top of the window. if you clicked on an image's properties a window will pop open showing you information on the image. one of them will be the address for the image, just highlight it and copy it. To deeplink the image, simply follow the instructions in #1 above, or manually type in the IMG brackets and stick the address between them.

  • This is the easiest way. The forum is equipped with a rich text WIZYWIG editor that is turned on by default. This means that you can copy and paste already formatted text and images just like you would do in a word processor like Word or WordPerfect. To deeplink an image, simply find it on-line, highlight the image, click copy, go back to your post and paste the image where you want it to appear. You will see the actual image appear in your post as you are writing it. I find it easier to highlight images if I right click on "View Image" first. IN that way, the browser will show you the image by itself and without the rest of the formatting from the web page it was in, which makes it a lot easier and cleaner to highlight and copy.
When uploading images, please make sure that you have permission to do so and that you post correct attributions to the image source/owner if the image is not yours.

I hope that helps. If anyone has any questions, please don't hesitate to ask.
 

·
Registered
Joined
·
12,328 Posts
what icon are you clicking?
you should use the 3rd icon, that looks like a mona lisa and paste the full html address of the location of the photo.
 

·
Registered
Joined
·
9,873 Posts
Stanley,
sorry for the confusion, but when you click on "Additional Options" you should see:
Notify me of replies. Return to this topic. etc. and beneath that you should see "Attach" with a "Choose file" box beneath that.
Click on the "Choose File" box and it opens a Window that lets you browse your desktop, hard-drive, etc. Choose the photo you want to attach to your message and it should all work.
good luck!
JohnN

stanley said:
I am clicking the additional options, I don't see an icon that looks like the Mona Lisa.
 

·
Registered
Joined
·
9,873 Posts
Alexander_john said:
Hello,
As i am new on this community,
So i try to add picture with my post, but failed,
Can any one help me?
The forum uses the IMG /IMG html statements (each enclosed in brackets [ ] ), with the URL to your images in the middle. If you look at the menu items above, just below the symbol for underline ( U ) is an icon you can click, then paste your URL link into that, and click "Ok."
If you want to upload an image from your computer (keep it less than 2meg and also size it to about 1020 wide maximum), then click on "Additional Options..." (that is just below this text screen when you post or reply). You will see "Attach:" and below that the "Choose File" button.
Good luck!
 

·
Registered
Joined
·
1,140 Posts
Does posting directly to the Forum actually work, again--since the latest "update?" It wouldn't with the last, stating something about a security issue. Just curious.
 

·
Registered
Joined
·
12,328 Posts
right click on an image and select copy image location
click on the insert image icon, yellow box with mountains in it. paste the location.
That's it.
 

·
Registered
Joined
·
235 Posts
-My Titanium Seiko Samurai -Not Bad ! It is so light that it sits so effortlessly that one hardly notices it,except when Checking the Time.
Eli
 
1 - 13 of 13 Posts
Top