[SeikoKid]

Would someone be in a position and able to show me a picture the crown and stem on its own - removed, for the above watch please. I'm trying to match a crown I have here but I can only find pictures of the crown fitted to the watch when I search the web

thanks in advance for your assistance

 

[Grammarofdesign]

I've got the -5479 model that I could pop the back off and pull the stem if that helps.

What's the purpose here? To determine how long to cut a new stem? Not sure if a picture is the way to do that best.

 

[jringo8769]

Grammar...this is the arnie model...we have been trying a crown for my 601 arnie and info is less than available...i was hoping someone here had one to see what it just looked like...must not be anyone who owns a H601 arnie

 

[SeikoKid]

Yeah, as I wrote in my post I'm trying to match a crown I have here but there are only pictures of the crown attached and in situe to the watch online

If there are any washers etc, aswel would you be able to show them in some sort of tech sheet diagram way - I mean just so I can get an idea of the assembly situation

Thanks

 

[SeikoKid]

Anyone able to assist ?

 

[7s26b]

I think you'll find there is a crown 60E31NS1, crown and stem gasket 0A0150B0A, stem 0351161 (a fairly standard assembly). But inside the crown tube is a plastic insert (HOLDING RING FOR CROWN GASKET 89995390), this is the same as many of the smaller 150m quartz Seikos.
Here's a picture taken from http://forums.watchuseek.com/f6/seiko-7546-604a-plastic-crown-tube-insert-replacement-901779.html
I hope this helps.

 

[SeikoKid]

Not really - I'm simply wanting to look at a crown and stem removed from a H601 5480 so I can match a potential candidate I have here as there are no images or diagrams online to work off
I have all the part numbers already and have been able to locate everything else -

The crown is not available to buy anymore from anywhere

 

[7s26b]

Here are some crappy pics from ebay http://www.ebay.com.au/itm/Vintage-Seiko-Arnie-or-Arnold-Diver-Watch-H601-parts-Case-Shroud-Etc-/221242987521?nma=true&si=TGjii7dScIDB04Dro8MaKZBZKHc%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
If you take the time to cross reference the holding ring for crown gasket and the H601, there are over 500 candidates !! http://service.seiko.com.au/pls/apex/f?p=104:20:80020624100368:Go:NO:RP::

 

[SeikoKid]

perfect - thank you
this is what I have , I'm hoping it will suffice

 

[7s26b]

perfect - thank you
this is what I have , I'm hoping it will suffice

Do you have the part number for that crown??

 

[SeikoKid]

60E13N or 60E15N

 

[jringo8769]

hey i got some info from the internet...how about this number...60E31NS1...any idea what this one looks like?..

 

[SeikoKid]

That's the original , mentioned earlier in this post and also shown in the link provided

 

[jringo8769]

that number was emailed to me...

 

[Steve]

I just happen to have a h601 arnie on my desk awaiting a new battery. Here are some shots of the crown and stem.

 

[jringo8769]

that is exactly what i need...can i get some dimensions please?...thank you so much

 

[Steve]

I don't have a good micro measurement tool, but I'll do my best to give some measurements.

Crown: 5mm
Length from the bottom of the crown to the tip: 17.5mm
Length of the 2nd skinniest part of the stem to the tip: 15mm

 

[jringo8769]

thank you steve...that pic was so helpful too

 

[jringo8769]

hey look at this one...i found pic online...this looks very close...it is from a 7002 diver

 

[jringo8769]

steve can we see the end of it?...any more views ?