The Watch Site banner

First Dive Watch - To Mod or Not to Mod?! 7002-700A

14020 Views 43 Replies 15 Participants Last post by  JonathanHutson
So I've been waiting a fair few weeks for an early 7002-700A to arrive from Australia. It has finally dropped through the door today. I'm not big on divers but I figured I should at least give them a go, especially with a holiday abroad fast approaching and hoping to do some snorkelling.

Crown screws down about 1.5-1.75 turns, no big issue as long as it'll seal for a few metres.
Bezel no longer clicks into position, crystal looks like somebody went at it with an axe, obviously the bezel insert is faded and it would appear the hands are starting to corrode.
Movement is running, date change works, but a service probably won't go amiss.

So first thoughts are to maybe try and stay true to how it came, but then there's so many modding options that it could any way!

See less See more
1 - 1 of 44 Posts
Thanks for the photo documentation. As a newb, I appreciate it.

1 - 1 of 44 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.