The Watch Site banner

Crown and stem hard to remove on a 7002-7001.

2291 Views 2 Replies 3 Participants Last post by  water70proof
I have this driver and it is difficult to screw in the crown although it will screw down. I thought I would remove the crown and stem assembly to clean it but when I try to release it by pushing on the little indent nothing happens. It doesn't seem to want to budge. Is there a trick that I am missing. Any help would be greatly appreciated or is difficulty screwing in the crown on this model typical. Thanks guys for any input.
1 - 3 of 3 Posts
Is it possible that it has the wrong stem fitted and jammed in the key less works ?
IIRC, there is no indent. Rather, with caseback off, pull the crown out to setting position and you will see a little lever pop out near the stem. Depress it and the stem should come out.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.