The Watch Site banner

1 - 20 of 69 Posts

·
Registered
Joined
·
1,035 Posts
Discussion Starter #1 (Edited)
hello,

i have a hobby that might horrify some, but having been trained as
an architect and a sculptor, it comes to me very naturally. i like to
change the shape of watch cases that i find to be not beautiful,
clunky, chunky or overly large, or dangerous to the wrist, even.

dangerous to the wrist? yes. There are many watches that have hawk's
beaks on their lug ends, pointing right down into the wrist. i was wearing
such a watch 20 years ago, teaching a yoga class, when i was sent
inadvertently sprawling, i was fine, but the iwc fleiger chronograph i was
wearing drew blood, and i had to continue teaching with a bleeding
wrist. later that day, i filed down those lug ends so that this would
not possibly happen again, and i do the same with any watch i've
liked enough to buy and keep, so the first photo i'll download is an
nth scorpene which is shown with it's lugs defanged, i also had the
case bead-blasted.

next up is a watch case i thought was just overly baroque, an omega,
i don't see why anyone would want twisted lugs on a "tool watch".
so i filed the twist out of the case, and my experience of the watch
now is that the dial, which is so gorgeous, gets most of the attention,
and the lovely thinness of this watch really gets expressed, what i love
most about this watch is how flatly it sits on the wrist ( love the lume,
too:) and with this case mod, it seems to sit lower.

i should interject here, i don't like polished finishes on watches,
especially tool watches, so when i am done filing down the case on
any watch, i then create a brushed finish with wet/dry sandpaper,
i find #320 to be the best for the final finish. what i then have is
a fuss-free finish on the watch, it can be retouched at home anytime,
and you don't have that feeling of having a fragile egg on your wrist
that you might have when you're wearing a showpiece of a watch,
( my seiko bullhead, which i sold, comes to mind as this sort of a
watch. and no, i did not file down and sand the bullhead, i let it
go as being an entire implausible watch, i do not ever time my speed
over a fixed distance.)

some watches are just clunky, and i have a strong preference for
streamlined, and i don't mind taking matters into my own hands,
especially with a more common watch like a seiko 007....sometimes
i remove the crown guards completely, which i feel turned the
7S26-0028 from a buick into a corvette, sometimes i keep the
crown guards in place but streamline the metal, the goal being to
make the metal look as much like mercury as possible, this can
be seen on the 7c43-7010 ( which was not in fine condition) and
the sarb059 alpinist, which was coming across as a fine country
gentleman's watch, and i just am not ready to be that guy....i
got a sapphire in the watch too, to lighten it up. i spend some
real time hiking in the woods, and it's great to wear a watch that
is dedicated to that purpose.

( the more common green alpinist looks to me like it should be
marketed exclusively to leprechauns. sorry. i don't dislike leprechauns
at all, but i am glad seiko made an alpinist like the one i got....)

i've got a fairly small wrist (6-3/4") and i gravitate towards watches
that are 40mm and under, and i was very excited to see the new
mini turtles come out, and they wear much like a standard 40mm
watch. but there was a frilly detail on the case, it looked to me
like a tail fin on a car, perhaps you like tail fins, but i think extraneous
details like this detract from a watch...anyway, it was an easy job
to turn the mini turtle into a true turtle/cushion case, took less
than an hour, i was happy to take the polish off them and make
them all matte/brushed, they wear even smaller that way.

i had a dagaz aurora that rode the wrist on sharp blades. this is a
subtle and easy mod, i flattened those blades that contacted the wrist,
and in doing so reduced the thickness of the watch by at least 1.5mm,
making it sit even lower on the wrist, a really huge improvement.
i should take before pictures, i guess, i couldn't believe a watch
could be sent out into the world with sharp creases like that as
contact points on a human arm. this one was fast and easy too,
then i sanded down the sides, made the watch way less glitzy.

one last one, a helson 40mm shark diver that to my eyes just had
outlandishly fat and thick lugs, i rounded off their ends, slimmed down
their profile, and thinned the straight-on thickness of the lugs too.
it makes the watch way more wearable, and it is still a very robust
watch, no getting around it.

well, that covers the scope of what is kind of a hobby-within-a-hobby
for me. if anyone else out there does similar work, i'd love to hear from
you, if anyone would like to have similar work done on a watch, i'd be
happy to do so very reasonably for you, because it is work that i really
enjoy doing.

best regards, and thanks for reading,

peterr
 

Attachments

·
Registered
Joined
·
1,035 Posts
Discussion Starter #3
I like the look of your 007 case with the guards removed.
thanks willie b,

to properly do that, it's best to work with an empty case, have
a watchmaker take it all apart or do it yourself if you're comfortable.
you wouldn't want to mar the crown. i usually put a small metal pipe
( modeling stuff found in most hardware stores) around the crown
tube so the threads don't get messed with either....)
 

·
Registered
Joined
·
7,612 Posts
I think it's really impressive work Peter. As you know I would typically want to keep the case as it looks, but I have a few old knackered cases that I am considering sending to you, or picking your brains as to what to do! :)

Bollyrotten on here (Mike Bolton on YouTube, not the singer) also does great restorations of cases.

By the way, I really like that SKX mod in the forth picture down, and I have warmed to the 7C's look since you showed it to me. :)
 

·
Registered
Joined
·
1,035 Posts
Discussion Starter #7
I think it's really impressive work Peter. As you know I would typically want to keep the case as it looks, but I have a few old knackered cases that I am considering sending to you, or picking your brains as to what to do! :)

Bollyrotten on here (Mike Bolton on YouTube, not the singer) also does great restorations of cases.

By the way, I really like that SKX mod in the forth picture down, and I have warmed to the 7C's look since you showed it to me. :)
that mod is just so legible, it reads like a time machine...the only thing
if lacks is great lume, it's a hong kong dial, would you be able to relume
the 12-3-6-9?
 

·
Registered
Joined
·
1,035 Posts
Discussion Starter #8
Much respect, that's a brave thing to do. Like Guy I too like the fourth piccy, the satin finish is nice.
that one was professionally bead blasted, and it really shows as such,
the #320 sandpaper works pretty well, but if you held it to a loupe or
something, it'd be like lon chaney taking off his mask, i bet :)
 

·
Registered
Joined
·
453 Posts
Peter, this is excellent work! Kudos to you.

I must admit that I shuddered a little reading the descriptions before studying the pics. But I think this is because I was picturing what one of my watches would look like if I tried to file and sand it, rather than an expert with the artistic eye such as yourself.

Your results speak for themselves and look great! I’m trying to decide which is my favorite. I too like the mod with no crown guards, but the alpinist and scorpene are great, as well.

I think someone mentioned in another post that the great thing about your stuff is how much you enjoy it. Your eye for design and passion for the hobby are evident from your posts, and a little bit infectious. Keep up the good work!

Now, I’m off to the action sites to find a knackered example to send to you for improving ....
 

·
Registered
Joined
·
1,035 Posts
Discussion Starter #13
send me your knackered....:)

Peter, this is excellent work! Kudos to you.

I must admit that I shuddered a little reading the descriptions before studying the pics. But I think this is because I was picturing what one of my watches would look like if I tried to file and sand it, rather than an expert with the artistic eye such as yourself.

Your results speak for themselves and look great! I’m trying to decide which is my favorite. I too like the mod with no crown guards, but the alpinist and scorpene are great, as well.

I think someone mentioned in another post that the great thing about your stuff is how much you enjoy it. Your eye for design and passion for the hobby are evident from your posts, and a little bit infectious. Keep up the good work!

Now, I’m off to the action sites to find a knackered example to send to you for improving ....
that would be so cool, i'd be happy to file something down for you...the 7S26 seiko/sinn gets the most love, maybe because it was bead blasted, but also
because the cases are a bit clunky, and there really is a corvette in there
waiting to be let out....but i just did my first 6309 case mod, and it was
more effective than i thought it would be, it really diminished the effective
mass of the watch, visually. i'll post it when it's done....

thanks,

peter
 

·
Registered
Joined
·
1,035 Posts
Discussion Starter #17
How did you achieve the soft luster look on your cases?
the scorpene and the 7S26 were both bead blasted, they're also both
sinn homages, so that makes bead blasting even more appropriate.

so, any watch without the 12-3-6-9 dial has been first filed ( and if you
finish file with a very gentle touch, you can almost leave the case polished)
and then i sand it carefully, always along the length of the case, none of
that fancy perpendicular brushing for me, i am not a fan...i'm using #320
paper to finish, and a well used piece of #320 might translate to #500
for the last passes....the case and bezel edges offer guides to parallel,
even brushing....
 

·
Registered
Joined
·
1,035 Posts
Discussion Starter #19
that would be so cool, i'd be happy to file something down for you...the 7S26 seiko/sinn gets the most love, maybe because it was bead blasted, but also
because the cases are a bit clunky, and there really is a corvette in there
waiting to be let out....but i just did my first 6309 case mod, and it was
more effective than i thought it would be, it really diminished the effective
mass of the watch, visually. i'll post it when it's done....

thanks,

peter
wanted to add, any 007 has a cushion case lurking within, and it's a
very beautiful cushion case, too. it's just a matter of subtraction....
 

·
Registered
Joined
·
277 Posts
Had a go at a SKX007 case. Dremel with a carbide bit for the heavy work, then files to soften the rough edges. Into the bead blast cabinet to see what that will do. Plan to do a white pilot mod on it now.
 

Attachments

1 - 20 of 69 Posts
Top