The Watch Site banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I recently managed to pull the crown and pin out of my sawtooth and although I replaced it again I can't change the date any more. What's wrong?

Any useful advice gratefully received
 

·
Registered
Joined
·
808 Posts
I recently managed to pull the crown and pin out of my sawtooth and although I replaced it again I can't change the date any more. What's wrong?

Any useful advice gratefully received
Likely, the setting lever has broken. Or the castle gear may have fallen out of place.
Try putting the stem/crown back in with the dial facing up. Tap the watch gently before to push the stem/crown back in.

If that doesn't work then the watch will have to be at least partially dismantled to find and fix the problem.
 

·
Registered
Joined
·
1,719 Posts
The Sawtooth is a 7n36 movement, if I recall. Get yourself a whole new movement for around $15-$20 USD. They're cheap and not meant to be worked on like the older Seiko quartz movements...
 
1 - 4 of 4 Posts
Top