The Watch Site banner

1 - 8 of 8 Posts

·
Registered
Joined
·
695 Posts
Discussion Starter #1
Dear Comrades,

Does a SKX009 Pepsi insert fit onto a 7548 or 6309 or 6306 bezel?

Any info will be greatly appreciated.

Very best regards . . .

Capt. Serdal
 

·
Craftsman
Joined
·
3,724 Posts
From what I understand, Yes it does.
 

·
Registered
Joined
·
695 Posts
Discussion Starter #3
Thank you so much for this super fast reply, my friend.

Very best regards . . .

Capt. Serdal
 

·
Registered
Joined
·
2,347 Posts
It fits, but not as nice and snug as the original...it's a hair loose and needs a dab of something to stay in place. The originals snap in with a satysfying click.

Rob
 

·
Registered
Joined
·
205 Posts
It fits, but not as nice and snug as the original...it's a hair loose and needs a dab of something to stay in place. The originals snap in with a satysfying click.

Rob

I am now of the opinion the size of 6309 bezels changed by a mm or so at some point. Later bezels seem to accept AM and SKX00x inserts snugly and earlier ones need glue - this is supported by my recent experience with a 79 insert being far too big for an 85 bezel. I might have just had a run of coincidence and be reading too much into it but...
 

·
Registered
Joined
·
695 Posts
Discussion Starter #6 (Edited)
Dear Rob and Mr TPG, thank you very much for your precious inputs.

Very much appreciated.

Please chime in if you have any more info and experiences, Comrades.

Very best regards..,

Capt. Serdal
 

·
Registered
Joined
·
695 Posts
Discussion Starter #8
Dear Andrema, thank you very much for the info.

I put the insert on my 6306-7000 bezel, and it feels like a perfect fit.

Capt. Serdal
 
1 - 8 of 8 Posts
Top