The Watch Site banner
1 - 20 of 21 Posts

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #1 ·
Thanks
 

·
Researcher
Joined
·
5,311 Posts
Stem number is 357610 :)
 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #3 ·
Thanks Dave, typical i have 357611 in my spares box :)
 

·
Researcher
Joined
·
5,311 Posts
You're welcome mate, the info is in here - right at the bottom.
 

Attachments

·
Registered
Joined
·
931 Posts
Aloha 7s26b Dave , I have a few old Seiko and Seikosha movements in decent shape that I picked up. Where can I get the type of info that you passed on to Tiger..Mahalo
 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #7 ·
Thanks Duncan, i suspected it was when looking at mine but i wasent sure.
 

·
Researcher
Joined
·
5,311 Posts

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #9 ·
Thanks guys, a stem sourced from Stefan and I had a NOS crown so another WIS member will be happy :)
 

·
Special Member
Joined
·
1,393 Posts
Anyone know the part #s for crown & stem for J12082 Silverwave ?

Sorry to dig this dinosaur up, but i have a question on this crown. There is only 1 crown ever used for this watch? And anyone got a picture of the crown?

Edit: attached 2 pictures. Can you guys confirm what is the correct crown? Is it crown #1 or crown #2



 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #13 ·
#2 ?

 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #15 ·
Yes 2!
But it does not fit onto my stem tube??
John, any chance you could measure the tube diameter on your sw?
The "stem" of the crown is 1.50mm, struggling to measure the bore of the crown but it looks like 3mm but don't take that as gospel Ian :(
 

·
Registered
Joined
·
540 Posts
It’s the washer thingy in the crown that holds seal in, does not go over stem tube it’s to small a bore!
It will not go onto tube, I though they were all the same crown on the silverwave?
 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #17 ·
What dia is the crown tube ?
 

·
Registered
Joined
·
540 Posts
I need to take out crown and stem again, but wanted to know what size was the diameter on yours John so can compare if mine is same size.
Ooeerrr mother......
 

·
Administrator
Joined
·
33,856 Posts
Discussion Starter · #20 ·
1 - 20 of 21 Posts
Top