The Watch Site banner
1 - 7 of 7 Posts

·
Researcher
Joined
·
5,311 Posts
A, B and C.
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #3 ·
On a more specific note, do all versions fit the case in the same way or is one larger or smaller than the other due to the slight variation?
 

·
Registered
Joined
·
2,100 Posts
On a more specific note, do all versions fit the case in the same way or is one larger or smaller than the other due to the slight variation?
In terms of casing, they all have the same dimensions.

There are different calendar wheels for crown at 3 and crown at 4-ish.
 

·
Registered
Joined
·
241 Posts
Not all interchangeable?

On a more specific note, do all versions fit the case in the same way or is one larger or smaller than the other due to the slight variation?
Not sure if I have imagined this but I have come across different thicknesses of the plastic movement holders so you may have to swap them over as well as the movement.

I have also seen that 7S26B movements are a little bigger so when I replaced an A with a B in an 0040 diver the rotor did not swing freely as it catches near the crown.
 

·
Researcher
Joined
·
5,311 Posts
Divers have different movement holders to dress watches.
 

Attachments

1 - 7 of 7 Posts
Top