The Watch Site banner
1 - 1 of 1 Posts

·
Researcher
Joined
·
5,311 Posts
The hands are sized by the diameter of the shafts/ pinions to which they fit, not the length.
110/65/20 = 1.1mm / 0.65mm/ 0.2mm . Here's an example of an automatic watch with 150/90/20 hands.
Best to post pictures of what you're trying to describe - it's not easy without. DO NOT remove the insulator unless you want the smoke to escape from your watch - when the smoke is gone, it won't work!!
PLEASE - before you continue, download the tech pdf from the forum and read it, or you will destroy your watch very easily - been there, done that, got the T-shirt.
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top