The Watch Site banner

1 - 13 of 13 Posts

·
Registered
Joined
·
2,906 Posts
Discussion Starter #1 (Edited)
:)OK ive have a new arrival that requires a new crystal- 7548-700F
I have a press can anyone guide me through the process (Im a crystal virgin):eek:hmy: and direct me to a new crystal please.
Thanks
 

·
Researcher
Joined
·
5,031 Posts
If you'd like help with finding parts, please always give the full eight digit code from the case back - it sure makes life easier. There's no ESP button on this forum :)
 

·
Researcher
Joined
·
5,031 Posts
320W34GA00 Same as 6309 divers.
 

·
Registered
Joined
·
2,906 Posts
Discussion Starter #10
Good crystal install. But......

Did you had a fight with the bezel insert and some glue by any chance?
It's all I had Merritt (bar the one it came with) it's not glue they are scrapes- it fitted ok
 

·
Registered
Joined
·
2,100 Posts
I put generic mineral glasses in them (all you need is the thickness and diameter) unless a customer wants the genuine thing.
The bevel on the glass has to be the same or the bezel (a.k.a. crystal retaining ring) either won't seat or won't push the crystal into the gasket forming a water-tight seal.
 

·
Registered
Joined
·
3,950 Posts
The bevel on the glass has to be the same or the bezel (a.k.a. crystal retaining ring) either won't seat or won't push the crystal into the gasket forming a water-tight seal.


Yek, you're right. I do use the proper aftermarket glasses. I was thinking of the 7002 divers I put generic glasses into.
 
1 - 13 of 13 Posts
Top