The Watch Site banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I can't seem to find a mainspring for a 6309. Jules Borel seem to run out, so did CousinsUK. Is there any other movement where the mainspring is compatible with my 6309? I read a thread where a ETA 2892 mainspring was used and worked well, even with better amplitude. However, not enough researched was done for practical use.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Has anyone tried what I mentioned above, using a ETA 2892 mainspiring, or any other type in a 6309 barrel?
 

·
Registered
Joined
·
11 Posts
Looking at part nos. for 6308A, 6309A, 6139A (base cal 6106A) movements, all have same mainspring (401615) and same barrel+arbor nos.(205613). So any of these should do. I got a 401615 from stefan (schillachi61 on ebay UK). Note that 6139B lists mainspring 401616 which is impossible to source, I used a 401615 as barrel & arbor are same and it works ok too.
 
1 - 7 of 7 Posts
Top