The Watch Site banner
1 - 1 of 1 Posts

· Registered
Joined
·
912 Posts
As others have said, this is very common. And the main use I get for my staking set. (👌👏 clockbloke!)
If you do any regular repairs then this is a very handy and worthy tool to have.

That said, it is very easy to find a method for doing it without the staking set. I believe I had done it by placing the axle In the crook of my tweezers and using a hand setting tool (with small hole) to firmly set the wheel back onto the assembly. Check with a loupe that the two are completely mated.

I always like to reduce the action if the reset, and especially so when this has happened.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top